Platform Boxing Rings 100 cm height. These rings characterized by simple construction and reasonable price. They are recommended for training and for competitions in clubs or sport sections.
Warranty: see details here.
TECHNICAL DESCRIPTION The ring represents a square, mounted on a platform of 1 m high with the corner posts. The ring's platform carcass consists of metal frame, plywood flooring, elastic polyurethane foam (or foam polyethylene) mats and synthetic PVC covering. Carcass frame is made of profile pipes 50x30 and 30x30 with floor supports, 4 of which are corner ring pillars.One of the corner pillars in the lower part has a screw height adjuster. This allows you to set the ring in the horizontal plane.The plywood flooring of the platform is assembled from the plywood panels fixed on the steel runs of the ring. Corner shields have a cutout for the corner stand. The soft coating of the ring platform consists of polyurethane of secondary foaming. Floor mats are covered with a PVC fabric cover. On the contour of the cover there are eyelets with the hooks to which an expander is attached. Tightly fastened on the frame cover fixes the mats in the ring. There are 4 ropes stretched in the perimeter of the ring. Corner pads are installed at the triangular corners of the ring. Angular pads and ropes in the opposite corners of the ring are red and blue. White pads are installed in the neutral corners of the ring. The ropes of the ring are stretched between 4 angular pillars. Posts are covered with pads made of PVC fabric of the appropriate color. The lower rope of the ring is pulled at a distance of 400 mm. from the ring cover, the second - at a distance of 710 mm, the third - at a distance of 1020 mm. and the 4th - at a distance of 1320 mm. For lifting to the ring there are 2 ladders at the working corners of the platform.