Orders from buyers located outside Ukraine are accepted only If the total amount of the order exceeds 5000 USD.
Shipping and all custom procedures are paid by the buyer.
Bag material: natural leather 1,8-2,2 mm, reinforced from the inside with fabric
Shield material: plywood
Warranty: see details here.
The frame of speed bag platform is made of a pipe D = 32 mm. The carcass is attached to a frame mounted to the wall. On the frame there are holes for changing the height of the bag from the floor.
The fixing of the height of the speed bag platform is carried out by means of a bolted joint. The frame is connected a plywood platform from the bottom, which serves to rebound the pear.
The bag is hanged to the plywood on the cardan joint. The cover of the bag is made of leather 1,8-2,2 mm. The side surface is made of 6 petals. Inside the bag an inflatable rubber chamber is inserted.
The bag has a point of attachment located at the top which is made of leather. Suspension of the bag to the wall is carried out on four anchors with a threaded part M 10. and a length of less than 80-100 mm.
Depending on the type of wall the anchors may be of spacers type (for concrete and silicate bricks) or chemical type (for foam concrete and hollow bricks).